0 986 435 503 Cummins 5.9L (Early)
2003 – 2004.5 Dodge Cummins Pick-up (Common-Rail).
BOSCH CP3 Fuel system with SOLENOID injectors.
- Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
- Feed tube: Pre-torque to 11 lb-ft. to ensure feed tube is seated & centered.
- Injector hold-down bolts final install: 89 inch-lbs.
- Feed tube final install: 37 lb-ft.
- Rocker Arm mounting bolts: 27 lb-ft.
- Wire connector nuts final install: 11 inch-pounds. DO NOT OVER TORQUE!
We also offer feed tubes, o-rings, injection pressure regulators (sometimes called mprop or fsa), and many other complementary parts for this truck.
*NOTE* Injector installation torque is critical to injector life and performance. Ensure the injector bore and injector seat are SPOTLESSLY CLEAN before installing. Debris/carbon can prevent injectors from sealing correctly which can create leaks or poor running complaints.
0 986 435 505 Cummins 5.9L (Late)
2004.5 – 2007 Dodge Cummins Pick-up (Common-Rail).
BOSCH CP3 Fuel system with SOLENOID injectors.
- Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
- Feed tube: Pre-torque to 11 lb-ft. to ensure feed tube is seated & centered.
- Injector hold-down bolts final install: 89 inch-lbs.
- Feed tube final install: 37 lb-ft.
- Rocker Arm mounting bolts: 27 lb-ft.
- Wire connector nuts final install: torque to 11 inch-pounds. DO NOT OVER TORQUE!
Island Diesel offers feed tubes, o-rings, fuel pressure regulators and many other complementary parts for this truck.
*NOTE* Injector installation torque is critical to injector life and performance. Ensure the injector bore and injector seat are SPOTLESSLY CLEAN before installing. Debris/carbon can prevent injectors from sealing correctly which can create leaks or poor running complaints.
0 986 435 518 Cummins 6.7L
2008 – 2012 Dodge Cummins Pick-up (Common-Rail).
BOSCH CP3 Fuel system with SOLENOID injectors.
- Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
- Feed tube: Pre-torque to 11 lb-ft. to ensure feed tube is seated & centered.
- Injector hold-down bolts final install: 71 inch-lbs.
- Feed tube final install: 37 lb-ft.
- Rocker Arm mounting bolts: 27 lb-ft.
- Wire connector nuts final install: torque to 11 inch-pounds. DO NOT OVER TORQUE!
Island Diesel offers feed tubes, o-rings, fuel pressure regulators and many other complementary parts for this truck.
*NOTE* Injector installation torque is critical to injector life and performance. Ensure the injector bore and injector seat are SPOTLESSLY CLEAN before installing. Debris/carbon can prevent injectors from sealing correctly which can create leaks or poor running complaints.
*NOTE* These injectors have TRIM (IQA) CODES that will need to be programmed into the ECM with a Scan Tool. Ensure the ECM has the correct trim codes programmed to get the longest life and best performance from the injectors. Contact us anytime if you require assistance.